Select Page
SmartVent CAD files for download
SmartVent 3d interactive CAD

Please click on the image of the desired drawing to open the drawing in a new window or right-click (option+click for Mac) and the select “Save Link

See how SmartVent works as intake and as an exhaust vent with this 3d interactive. Make sure you download it so you can show your customers exactly how our ventilation solves almost every ventilation issue.



To download the DWG file click here

Product and Application Drawings

Standard SmartVent CADSmartVent
CAD drawing of product with basic measurement and diagram

SmartVent Eave and Off Wall Shed Application

SmartVent Eave
with off wall shed roof application shown
SmartVent CAD Drawings
SmartVent Eave
with Shed Roof
application shown
SmartVent Mid Roof Application
SmartVent Mid-Roof
Please note that SmartVent can be used almost anywhere
SmartVent CAD Eave and Off Peak
SmartVent Off-Peak
with Eave application
SmartVent Dormer Application
SmartVent Dormer Peak
Please note that SmartVent can be used almost anywhere
SmartVent Low Slope Fascia Application
SmartVent Low-Slope/Fascia
How to Miter SmartVent
How to Miter SmartVent
SmartVent Valley Application
How to use SmartVent in a valley application
Click Here for SmartVent End Cap Directions



SmartVent End Caps are 10.5″ square tapered ventilation pieces that seamlessly blend with Smartvent to give the roof a more aesthetic and clean finish to your intake ventilation project. (Do not use SmartVent End Caps at the rake edges)

The New, Patent-Pending ‘Universal’ SmartVent End Cap can be installed Right Side or Left Side, as you begin your SmartVent run or end the run. Designed with the contractor in mind, this easy to install end cap makes working with SmartVent simple and cost effective. Use it to end a SmartVent run near a dormer, valley, hip, chimney or skylight. Use it to begin a SmartVent run other than at the rake edge. At the rake edge, wrap SmartVent fabric around a full piece of SmartVent as shown in the SmartVent directions.

The SmartVent End Cap ‘tapers’ the SmartVent back down to the roof. All that you need to do is nail it down to the roof. Period! The fabric is already attached at the factory for right hand or left hand installations.

Refer to the technical drawing – click to enlarge details.
SmartVent CAD Drawings

Click here for SmartVent Specifications

Most houses with ridge vents do not have the proper soffit ventilation required because attic insulation blocks the
soffit vents. SmartVent allows cooler air to enter under the shingle, through the 1″ roof slit and out the ridge
vent providing superior air flow and attic cooling.

Click here for an expanding list of SmartVent Dealers. If no dealer is located near you please give us a call at 1-800-622-4455 and we will be happy to locate a dealer for you.

澳洲5几点开始 SG赛车走势图开奖号码 澳洲8现场开奖视频 极速飞艇一期计划